Is the crystal word laser engraving machine?
The crystal word laser engraving machine is ok, the processing effect is also good, no need to polish the product.
How to use the laser engraving machine for crystal characters?
The first step is to understand the customer's needs, what crystal characters need to be made, the file icons and texts to be produced, and the actual size and size of the production and installation.
The second step is to make the customer's requirements and make a CDR vector 1:1 scale rendering file according to the actual installation size. Then send the customer to determine the renderings.
In the third step, in order to save materials, the files must be re-released to achieve the maximum material utilization.
The fourth step is to edit the text mark in Wentai software, and then engrave the 8mm transparent acrylic plate on the laser engraving machine. After the engraving, engrave the 3mm acrylic plate.
In the fifth step, after the text mark is cut, the worker will bond the 8+3 acrylic word with chloroform chemical. Care should be taken when bonding. Here, we use a small syringe to absorb the chemical.
In the sixth step, if the crystal characters are made, there may be irregularities in some places. The Tsar era advertisement will be polished by a sander.
In the seventh step, some crystal word customers are more demanding. Here, the Tsar era advertising factory will have an extremely strict polishing process. The crystal word is polished with a high temperature flame of hydrogen.
The eighth step, the crystal word is done.
Are there any precautions for laser engraving machine?
Crystal word laser engraving machine notes, one is the operation problem, the second is the quality of the machine itself.
First of all, when the machine is working, it must be stable, and the speed must be fast. If this is not the case, change the machine.
When the cutting speed is slower, it is easy to break the knife. If it is not deep, it will go twice, or three times.
The edge of the machining needs to be polished. The effect of the CNC machine is far from the laser machine. The laser cutting is very beautiful. The laser cutting machine can cut the acrylic of 5 cm thick.
In this case, the crystal characters made will be very beautiful, and the light transmission effect is good.
What is the procedure for laser engraving machine for small crystal characters?
Sharp corner compensation needs to be set in the software. For example, in Wentai Engraving Software:
1. Click “Cartographic Output” to pop up the output screen.
2, click "Settings", pop-up plotter settings screen;
3. Click “Compensation Settings” to pop up a dialog box.
4. Select “Sharp Angle Compensation” and adjust the required value to achieve the desired result.
The compensation value is between 0.1 and 0.7, and the general setting is 0.25. In addition, the cutting speed of the cutting machine should be set to 20 or less.
