The lacquer worker urgently removes the rust method, and the second is the physical method of rust removal: by means of skill knocking, shovel, scraping, brushing, sand or flexible frustration to eliminate surface rust and scale. It is also the most succinct way to use a blade, a scraper, a pointed hammer, a wire brush, an abrasive cloth, a broken saw blade, and the like.
If the maintenance is not timely, the stone engraving machine is due to the working environment. The spindle motor is very simple and rusty. The slight rust does not affect the normal operation of the spindle motor. However, if it is not processed for a long time, the life of the spindle motor will be shortened. Jinan Jingwei stone engraving machine gives several simple ways to remove rust:
Uniform spray on the motor, a chemical method to remove rust: can use WD-40 cleaning lubricant. About half an hour, you can use a cotton cloth to wipe off the rust on the stone engraving machine. If the rust is fierce, you can get a few more times. WD-40 is non-conductive and has excellent lubrication.
