1. Before cleaning, first check the condition of the oil retaining pot to determine and judge the effectiveness of the current fueling and refueling system. Secondly, check the physical and chemical state of the oil and fat, to see if there are thousands, hard, agglomerated, oil, thin, discolored and other deterioration conditions, to determine and judge the rationality of the oil aging replacement cycle, adjust the oil change cycle and oil replenishment system.
2. Bearing cleaning is a necessary part to restore the cleanliness of the thrust angular contact ball bearings and to carry out inspection and measurement of the bearing parts. Before cleaning, try to wipe off the old dirty grease. During the operation, be careful not to rotate the bearing at will, so as to avoid the intrusion of impurities in the process of disintegration and the rolling work surface; when handling the bearing, gently handle it to prevent bruises.
Adhere to the principle of combining use and maintenance, the operator can do three good things in the daily maintenance of the bearing (good management, good use, good maintenance), four sessions (will use, will maintain, will check, will eliminate the fault), three understand ( Understand construction, understand principles, understand performance). All kinds of bearing operators (drivers) must be trained to meet the technical level of the thrust angular contact ball bearing operation, and should meet the requirements. After passing the examination, the operation permit can be obtained.
Strict implementation of routine maintenance (maintenance) and regular maintenance (maintenance) systems. Daily maintenance: The operator carries out routine maintenance according to the routine, including the pre-class inspection; in the class, check whether the thrust angular contact ball bearing is running normally; after the shift, clean and maintain, find hidden dangers, and eliminate them in time.
Adhering to the principle of reasonable planning and scientific maintenance, the maintenance focus of thrust angular contact ball bearings is reflected in improving the quality of maintenance work, reducing downtime and improving bearing operation rate. To do this, we must do reasonable planning, preventive planning and overhaul, and pay attention to the use of scientific maintenance methods to maximize efficiency.
For more information and purchase please visit: https://www.supplyforever.com
