In normal times, some customers will be reflected in the engraving process of the engraving machine. The engraved objects are often misplaced, so they are often annoyed to tell the customer that their items have been damaged during the engraving process. In order to avoid this problem, the engraving machine The manufacturer introduces some tips for using the engraving machine to protect the engravings, hoping to help everyone.
1. Check if the pliers or chucks used for engraving are used incorrectly. At the same time, the wear of the engraving machine pliers or chuck will also cause the misalignment of the engraved objects. If the pliers or chucks are too tight, they will be engraved in the contact of the cutter head. The moment of the object will also cause the engraving to pop up.
2. For those irregularly shaped engraved objects, the surface seems to have been fixed very tightly. When subjected to downforce, it will also sway back and forth. At this time, try to put some scrap under the object to increase friction. The other is to keep the package that comes with the item. Although the object is irregularly shaped, the package itself may be very regular and easy to be fixed. Together with a small strip, the irregularly shaped object is very It is easy to be fixed. Or the trial tool fixes its regular parts and discards its irregular parts.
3. If the downforce to be engraved is large, consider whether you must use a cone-shaped nose. If the diamond head of the engraving machine moves too much during the engraving process, the pressure on the side of the tool will cause the engraving. The movement. If an incorrect diamond knife is used, it will also cause the same problem. A 90 or 100 degree diamond knife will penetrate the material and make the material move during the engraving process.
4. Since the engraving machine is often equipped with multi-purpose pliers or chucks, and they are made of iron, it is easy to damage the engraved objects or cause them to slip during the engraving process. Then use some rubber caps or rubber tubes. It will help in the fixation of the engraved object.
5. For engraving plastic patterns, you can attach the transfer tape to the back of the engraved object, then spray the liquid glue on the side with the tape attached, and then attach it to a surface that can be discarded. This avoids the use of double-sided. Glue, leaving a surface that is difficult to clean. Because the transfer tape is easy to peel and clean. Using a special engraved tape, the side of the tape is more viscous than the other side, so the plate can be moved at will.
Engraving is a fine work, not only the professional engraving technology, but also the right equipment, so as to ensure the quality of engraving.
